Configurando Grupo de Agregação de Links - LACP em Huawei NE20
Enviado: 07 Jan 2023, 20:24
Exemplo de Configuração: Agredação de Link LACP.
Certifique-se de que a configuração foi aceita e aplicada.
Código: Selecionar todos
#
interface Eth-Trunk0
description L2 Switch DM4380
mode lacp-static
#
interface GigabitEthernet0/3/1
description Switch DM4380
undo shutdown
eth-trunk 0
undo dcn
#
interface GigabitEthernet0/3/2
description Switch DM4380
undo shutdown
eth-trunk 0
undo dcn
#Código: Selecionar todos
<RTR1-SPO1-BRE>display interface Eth-Trunk0
Eth-Trunk0 current state : DOWN (ifindex: 66)
Line protocol current state : DOWN
Link quality grade : --
Description: L2 Switch DM4380
Route Port,Hash arithmetic : According to flow, Maximal BW: 20Gbps, Current BW: 0Mbps, The Maximum Transmit Unit is 1500
Internet protocol processing : disabled
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 8cfd-18ef-f6c1
Current system time: 2023-01-07 23:29:35
Physical is ETH_TRUNK
Last 300 seconds input rate 0 bits/sec, 0 packets/sec
Last 300 seconds output rate 0 bits/sec, 0 packets/sec
Input: 0 packets,0 bytes
0 unicast,0 broadcast,0 multicast
0 errors,0 drops
Output:0 packets,0 bytes
0 unicast,0 broadcast,0 multicast
0 errors,0 drops
Last 300 seconds input utility rate: 0.00%
Last 300 seconds output utility rate: 0.00%
----------------------------------------------------------
PortName Status Weight
----------------------------------------------------------
GigabitEthernet0/3/1 DOWN 1
GigabitEthernet0/3/2 DOWN 1
----------------------------------------------------------
The Number of Ports in Trunk : 2
The Number of UP Ports in Trunk : 0
<RTR1-SPO1-BRE>